Hardened & Tempered, Black Finish
These Stepped Strap Clamps have teeth at rear matching to that of Step Blocks to be used as support. Unlike other clamps, single piece of step block (not a pair) can be used as support with Stepped Strap
For Power Presses, Milling, Drilling, Shaping, Boring Etc.
CLAMP SMITH Universal Strap Clamp is most suitable for die clamping on power presses and a very useful clamp for job clamping on T-slot table of drilling, milling, shaping and other machine
For Plastic Injection Moulding & Pressure Die Casting Machines
It is one of the conventional type clamping system made up of S.G.I steel in 500/7 grade. Used in clamping of heavy moulds on plastic injection moulding machines and pressure die
For Plastic Injection Moulding & Pressure Die Casting Machines
It is one of the conventional type clamping system made up of S.G.I steel in 500/7 grade. Used in clamping of heavy moulds on plastic injection moulding machines and pressure die
For Machining Center, Milling, Planning, Plano-Milling Etc.
These Clamps are offered in heavier version of the above clamp for clamping heavy blocks. Basic function is same but this is used for clamping from sides of heavy blocks or thicker plates
For Machining Center, Milling, Shaping, Planning, Jig-Boring Etc.
Used in machining centre, milling, shaping, planning, jig boring, etc. This clamp is useful for job clamping where complete top surface of job is to be machined in one setting &
Leveling Jacks & Height Blocks
Levelling jack can be used as an adjustable support block for clamps and as a stopper or levelling block in fixtures or machines, as well as for levelling surface plates or other heavy duty work pieces. Its unique
CLAMP SMITH Clamping kit - 34 Piece is economical clamping kit housed in an elegant wooden box. Following table shows the contents of each model of clamping kit suitable different T-Slot sizes. All Items of clamping kit are taken from our range of
CLAMP SMITH Clamping kit - 58 Piece is available in an attractive powder coated metallic rack which can be hanged on machine or a wall or kept on a table. Each kit consists of all important clamping elements required to clamp a variety of work
Step Blocks are used as adjustable supporting Blocks at the rear of the clamps while clamping the workpiece. Different heights can be achieved by using combination of two different sizes of step Blocks. Available in pairs.(Pair consists of 2
Adjustable support plates are used as adjustable support at the rear of the clamp. It comprises of number of plates each 2 mm thick hinged together. Desired height is achieved very easily by swinging aside the required number of plates and using the
Hardened & Tempered, Black Finish
Tapped End Clamps are most useful clamps for injection moulding or pressure die casting machine where mould / die is clamped in vertical position, these clamp have adjustable support to adjust the thickness of mould